This article explains the general process to pair a Zigbee sensor with a Sailsense Hub. Specific instructions may vary depending on the exact models of your sensor.
Pre-requisite: you need to be on board of your boat with a Zigbee sensor that belongs to the compatible sensors list
- Open the Sailsense app
- Go to Boat Guard, then tap on Security Sensors
- Tap on the blue '+' at the bottop of the screen. The pairing wizzard starts.
- Tap on 'Activate Pairing Mode'. The LED of the HUB should become purple.
- Place the sensor near the HUB. A distance of 1 to 2 meters is ideal. When done, tap on 'continue'.
- Put the sensor in pairing mode (see sensor user manual for instruction). When done, tap on 'Sensor is in pairing mode'
- The HUB will now search the sensor. This can take up to 5 minutes.
- When the sensor is recognized, the app will display a success message. You will then be able to name the sensor and indicate where it is located.
- If the sensor pairing process fails, try the whole process again. Sometimes, several attemps are necessary.
Contact our support team in case of issue.